- Redesigned outline with a slightly wider nose allowing the Maquina a wider range of use.
- Soft winger design to increase planing and control at high speeds.
- Thin rails from nose to tail
- Super thin profile throughout
- Deep concave throughout the entire board with a flat, kicked tail, released by a progressive rocker
- Strictly thruster fin setup for pure, essential, radical turns in any wave size
If you want a board that’s responsive, go for the squash tail because this will allow for quick release, letting you turn easier, and add lots of looseness to your top turns. This shape gives your tail more width, and hence more surface area. Once again, the wider surface area of the tail means you get more lift, and it is much easier to maintain a speed through every section.
LIGHT, STRONG and DURABLE
The new LTE technology looks like simple but is one of the most sophisticated and innovative method of construction, it comes straight from the ultimate molded surfboards technology like the PRO technology. Consisting of a high definition EPS core, made with a EPS injection on a pre shaped mold, which is then injected with 36 Kgs/m3 density beads. This phenomenal core is so strong that you could ride it on the water without any lamination on it! The Full Glass and wood layup makes the board super flexible to ride and really strong to impacts.
The painted matt finish provide resistance to ultraviolet degradation and an easy to repair surface.
TRUST, COMFORT and PREDICTABILITY, 3 words to give you best feeling while riding.
Boards that may appear simple but which contain super technological secrets. High-tech products to ensure maximum durability, lightness and perfect flex for all types of conditions and rider. We completely revised the surfboard construction process, 27 years of know-how, after hundreds of boards produced and tested around the world.
RRD is today the ONLY brand in the market to use hi density Moulded EPS cores on kitesurfboards.
The new PRO line comes straight from the ultimate moulded surfboards technology which consists of a high definition EPS core, made with a high definition “Super EPS“ mould, which is then injected with 36 Kgs/m3 density EPS beads. Using the EPS injection, through the use of steam with the right temperature and pressure to blow the polystyrene into the mold, the result is a perfect mono-block core 40% more resistant, compact and with perfect surface definition (no open cutout bits are showing on the outside) compared to a classic CNC shaped surf board core. The parabolic carbon rails create a board that has a progressive smooth flex and a strong shape memory. All this not only create an unbeatable technology mix abut also a very stylish, classy and slick look.